Видео

Can someone get my man an impact?? Like everyone has said, good there's no talking but I reckon putting tool sizes on the screen as you use them. Or showing the tool to the cam would polish these right off

😊

Was eine Scheißarbeit.

Very helpful 😊

Por dónde lo vasiaste

What tools you need for to do it I can't unlock the little Tube

во всех букварях написано что при отключении аккумулятора сначала отключается минусовая клемма, здесь же наоборот

Coil spring kharb h kaise pta chalaga ji

Ok I have just completed this task. I have the documents from Peugeot so for those that are wondering all except for the bottom mount of the starter (and obviously the positive wire) , this job is completed from the top side of the engine. You do not have to remove the driveshaft OR the exhaust manifold, you can quite easily remove it. But you will have to stick your arm in a long way. If you are quite short this is going to be a bit of a challenge. I am 6ft and I was up to the armpit in getting this done. The top left hand bolt needs to be removed with hex bit and spanner, I don't think you'll do it any other way and 90% of this job is done by feel. However, it was in the end a pretty simple job. To make it easy on yourself, 1. Jack up car, get underneath and do that one bolt and the positive terminal. 2. Set the car back down and do the rest from the top. 3. Use a hex bit with a ratcheting spanner. for that difficult top left bolt ( the one closest to the engine) 4. the other bolts are no problem.

Too quick, cant see what youre doing

Ho necessità capire ma se uno deve collegare i cavi per ricaricare per giungere al polo negativo della batteria deve smontare tutto oppure ci sta una vite dove mettere la pinza? Dov'è?

🙄🥴💩

ew man why tf are you breathing like that so hard into the mic omg man

Horrible video

thanks for the help, helped me a lot

Cheers mate

Exactly what i was looking for. Genau was ich gesucht hab

Cambie el sensor y se acabaron los problemas, OK

Pourquoi enlever les vis juste debrancherl -_😊😊😊😢

Thank you.

Спасибо за видео! Очень полезное. Помогло мне найти контрольную пробку.

Is this the air conditioner drainage tube? I need to know its location at my C5 2002 2.0

Why are you cutting the plastic parts off of the cover?

Question. Which epoxy is used for the slip ring?

Muito bom o vídeo. Demonstrou na prática como se faz.

Could do with a soldering iron 10X the size of the toy one.

Great video what make /model of peugeot was this on?

thank you mate

Now how to open it and gut it ??

good tutorial well done

Very clear and to the point. Makes things much easier.

Cuánto tiempo dura una limpieza de DPF ? Y sería bueno revisar y limpiar los sensores

Tip for all car owners with a DPF. Buy a petrol car END of all Ur problems I'm serious ask any mechanic with a brain.

Thanks mann,i send mine to the machine shop and they couldnt doit.Then i clamped mine on the vise and used your steps and the bearing come out right away😂.Youre a life saver🫡

Ok So I have the 1.6L EP6CDT T7 engine. And when I go underneath the exhaust AND the driveshaft are in the way. Do you have to remove both to do this easily?

Thank you for your help

I couldnt get it back in, I had to take the radiator off, much easier.

Na erről vsn szó! Minden részecskeszűrőnek szétszedhetőnek kéne lenni! Úgy volna értelme! Nem csak a rablásról lenne szó!

This Idea is Much harder than 4 more screws. What could happen with your instructions is that 2 metal screw clips fall down under the car carpet. Speaking from experience, I would not advise this.

Thank you, excellent. On my 2010 B9 I couldn't get the starter out from by the exhaust and I couldn't get the exhaust off but I COULD pass it to right hand side of the engine and up through the gap by the fuel lines and out of the bonnet. For others... on mine you need to take the nearside wheel off and the arch to access the battery tray bold that's under the fuse box. I used an impact wrench and took off the welded on nut before realising the bold undoes from inside the wheel arch. No idea how I'm gonna get the allen bolts back - just waiting for the new starter.

Totally wrong method, proper placement of the filter in the base is very important, secondly you HAVE to use 0W-30 PSA certified oil

Hello. Can you tell me please from what piece could be the sound like rubbing stones?

Super little video and one of the only ones to get close ups of the thermostat, just changed on my 2011 207 1.6 hdi

Have you got video for the disc?

Anybody know what the oem brand is for this startmotor on a toyota aygo 2006?

It maybe because of faulty pcv valve oil shouldn't be there

Mouais le mien de filtre à particule (sur un Peugeot 3008 Blue HDI 120 cv 1.6 L et un FAP MONOBLOG ,et donc impossible de le démonter cte bonne blague et donc impossible d'avoir accès au filtre lui même

Forget to say that u have + - site

Very helpful video. I like the way you showed everything without skipping bits. Thank you

Good job there - pretty fiddly! 👍